Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

University of Ottawa

$16,000.00

Effect of flow obstruction on single-phase heat transfer

EF 2008-09

Résumé
The objective of the proposed investigation is (i) to provide an experimental data base for heat transfer enhancement downstream of flow obstacles, (ii) to compare the data base with current heat transfer prediction methods, and (iii) to present an improved prediction method. Properly designed turbulence-promoting flow obstacles can enhance the downstream heat transfer significantly. Very few experimental studies have been performed that actually measure the heat transfer enhancement due to obstacles in single phase flow; these heat transfer experiments covered only a narrow range of obstacle shapes and test conditions. The general assumption is that the heat transfer enhancement follows the law of Yao and Hochreiter (1982) which states that Nu = Nuo (1+A exp{-B z/Dhy}where where Nu is the Nusselt number for the obstacle-equipped channel, Nuo is the Nusselt number for the reference channel without any obstacles, A and B are geometry-dependent correlating constants, z is the axial distance downstream from the spacer, and Dhy is the hydraulic-equivalent diameter. Knowledge of the obstacle effect is of considerable practical importance since flow obstacles such as grids and spacers plates are used in all nuclear fuel bundles and are used as supports heat exchanger and boiler tubes. It is proposed to investigate the impact of the following parameters on heat transfer enhancement caused by obstacles: (i) various shapes of the leading and trailing edges, (ii) flow blockage ratios, (iii) Reynolds numbers and (iv) Prandtl numbers and (v) distance from the flow obstacle, (vi) number of flow obstacle in series. The tests will be performed in a directly heated test section, equipped with various thermocouples along its length. In order to maintain the same conditions at the measuring station except the distance from the flow obstruction, a unique experimental approach will be used: the obstacle will be moved non-intrusively using strong ceramic magnets located outside the (non-magnetic) Inconel test section. The impact on pressure drop will also be measured. In the analysis the relationship between pressure drop and heat transfer enhancement will be investigated. The possibility of introducing a figure of merit, i.e. expressing the optimum enhancement in terms of minimum increase in pressure drop will be examined as well.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
5243-2007
Name nom
Groeneveld, Dionysius
Department département
Mechanical Engineering
Organization id
28
Institution établissement
University of Ottawa
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2008
Competition year année de concours
2007
Award amount
16000
Program id
RGPIN
Program nane en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1054
Committee name en
Mechanical Engineering - B
Committee name fr
Génie mécanique - B
Area of application code
302
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Nuclear energy
Area of application fr
Énergie nucléaire
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Partie
2
Nb partie
3
Application title
Effect of flow obstruction on single-phase heat transfer
Keyword
NA
Application summary
The objective of the proposed investigation is (i) to provide an experimental data base for heat transfer enhancement downstream of flow obstacles, (ii) to compare the data base with current heat transfer prediction methods, and (iii) to present an improved prediction method. Properly designed turbulence-promoting flow obstacles can enhance the downstream heat transfer significantly. Very few experimental studies have been performed that actually measure the heat transfer enhancement due to obstacles in single phase flow; these heat transfer experiments covered only a narrow range of obstacle shapes and test conditions. The general assumption is that the heat transfer enhancement follows the law of Yao and Hochreiter (1982) which states that Nu = Nuo (1+A exp{-B z/Dhy}where where Nu is the Nusselt number for the obstacle-equipped channel, Nuo is the Nusselt number for the reference channel without any obstacles, A and B are geometry-dependent correlating constants, z is the axial distance downstream from the spacer, and Dhy is the hydraulic-equivalent diameter. Knowledge of the obstacle effect is of considerable practical importance since flow obstacles such as grids and spacers plates are used in all nuclear fuel bundles and are used as supports heat exchanger and boiler tubes. It is proposed to investigate the impact of the following parameters on heat transfer enhancement caused by obstacles: (i) various shapes of the leading and trailing edges, (ii) flow blockage ratios, (iii) Reynolds numbers and (iv) Prandtl numbers and (v) distance from the flow obstacle, (vi) number of flow obstacle in series. The tests will be performed in a directly heated test section, equipped with various thermocouples along its length. In order to maintain the same conditions at the measuring station except the distance from the flow obstruction, a unique experimental approach will be used: the obstacle will be moved non-intrusively using strong ceramic magnets located outside the (non-magnetic) Inconel test section. The impact on pressure drop will also be measured. In the analysis the relationship between pressure drop and heat transfer enhancement will be investigated. The possibility of introducing a figure of merit, i.e. expressing the optimum enhancement in terms of minimum increase in pressure drop will be examined as well.