Grant: Engage Grants Program
University of Windsor
$24,300.00
Joining of vacuum high pressure die cast aluminum alloy: A feasibility study
EF 2011-12
Résumé
In the past two decades, aluminum (Al) alloys as a light weight material have been increasingly used in the
automotive industry. The usage of Al in NA automobiles has gone from 45kg (101 lbs) in the 1970s to 150 kg
(326 lbs) in 2009, and will top 170 kg (376 lbs) per vehicle by 2020. Among the 150 kg aluminum usage in
each vehicle, almost 35% of automotive Al components were manufactured by conventional high pressure
die-casting (C-HPDC), which is one of the most cost-effective processes compared to other casting processes
(permanent mould and sand casting). But, the C-HPDC components are especially prone to high levels of
porosity due to high velocity turbulence of molten metal entering the die and oxide inclusions resulting from
melting and liquid metal transfer systems. More importantly, the entrapped defects make the joining of
C-HPDC Al components very challenging. Therefore, new HPDC processes, such as high vacuum (V-HPDC),
have been emerged to produce high integrity structural automotive components with enhanced properties and
significantly reduced number of defects.
The objective of this project is to develop a novel manufacturing process for joining vacuum high pressure die
casting aluminum alloy. The scope of the project includes comprehensive literature review, selection of filler
alloy, joining technology, and casting Al alloy, experimental joining of V-HPDC cast Al alloy with either a
wrought Al alloy or similar die cast alloy, and microstructural analyses and mechanical property evaluation of
welded alloys.
The outcome of the project will help maintain Canada's leadership in the world in producing light weight Al
automotive components since Canada is presently hosting several large die casting producers of aluminum with
Magna in Ontario and Lyster in Quebec. So, the development of the joining technology for potential advanced
Al products will lead to an expansion of world-wide use of Canadian value-added Al products.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
419166-2011
Name nom
Hu, Hongfa(Henry)
Department département
Mechanical, Automotive and Materials Engineering
Organization id
37
Institution établissement
University of Windsor
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2011
Competition year année de concours
2011
Award amount
24300
Program id
EGP
Program nane en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2000
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials science and technology
Research subject fr
Science et technologie des matériaux
Partie
1
Nb partie
1
Application title
Joining of vacuum high pressure die cast aluminum alloy: A feasibility study
Keyword
NSERC
Application summary
In the past two decades, aluminum (Al) alloys as a light weight material have been increasingly used in the
automotive industry. The usage of Al in NA automobiles has gone from 45kg (101 lbs) in the 1970s to 150 kg
(326 lbs) in 2009, and will top 170 kg (376 lbs) per vehicle by 2020. Among the 150 kg aluminum usage in
each vehicle, almost 35% of automotive Al components were manufactured by conventional high pressure
die-casting (C-HPDC), which is one of the most cost-effective processes compared to other casting processes
(permanent mould and sand casting). But, the C-HPDC components are especially prone to high levels of
porosity due to high velocity turbulence of molten metal entering the die and oxide inclusions resulting from
melting and liquid metal transfer systems. More importantly, the entrapped defects make the joining of
C-HPDC Al components very challenging. Therefore, new HPDC processes, such as high vacuum (V-HPDC),
have been emerged to produce high integrity structural automotive components with enhanced properties and
significantly reduced number of defects.
The objective of this project is to develop a novel manufacturing process for joining vacuum high pressure die
casting aluminum alloy. The scope of the project includes comprehensive literature review, selection of filler
alloy, joining technology, and casting Al alloy, experimental joining of V-HPDC cast Al alloy with either a
wrought Al alloy or similar die cast alloy, and microstructural analyses and mechanical property evaluation of
welded alloys.
The outcome of the project will help maintain Canada's leadership in the world in producing light weight Al
automotive components since Canada is presently hosting several large die casting producers of aluminum with
Magna in Ontario and Lyster in Quebec. So, the development of the joining technology for potential advanced
Al products will lead to an expansion of world-wide use of Canadian value-added Al products.