Grant: Engage Grants Program
McMaster University
$25,000.00
Rheology of glass-filled polypropylene plastics during injection molding
EF 2018-19
Résumé
Injection Molding is a manufacturing process for producing parts by injecting molten material (mostly plastics)*into a tool (a mold). Obtaining a defect-free part from an optimized injection molding (IM) process requires a*full understanding and control of the molten material flow, heat transfer between the material and the tool, and*material solidification. Material flow controls filing time and material ability to completely fill the tool. The*rate of heat transfer affects material flowability and its rate of solidification. On one hand, using a high tool*temperature during the tool filling stage of the IM process results in a better quality part, however it extends the*cycle time because longer cooling time will be required. On the other hand, using a low tool temperature during*filling would reduce the cycle time, but it would drastically affect the visual quality and physical properties of*the produced part. The current practice in IM employs a constant tool temperature that is usually determined*through trials for each molten material processed and part geometry, which renders the whole IM process*non-optimal.*This research project is related to the development of an innovative more efficient injection molding process.*The project will be carried out in collaboration with Windsor Mold Group (WMG), which is a Canadian*injection molding company located in Windsor, Ontario. A long-term plan has been developed by the applicant*and WMG to revolutionize the IM process. The main objective of this plan is to optimize the IM process by*using a dual-temperature tool (DTT-IM). The DTT-IM concept involves rapid heating and rapid cooling of the*tool during the filling stage and the cooling stage, respectively. The proposed DTT-IM process will result in*better part quality, less defects, lower cycle time, and higher productivity. The first phase of this long-term plan*is the research proposed in this application which focuses on studying rheology (flowability) of molten*polymers (plastics) at flow conditions and range of temperatures intended for the proposed DTT-IM.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
530259-2018
Name nom
Hamed, Mohamed
Department département
Mechanical Engineering
Organization id
27
Institution établissement
McMaster University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2018
Competition year année de concours
2018
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Partie
1
Nb partie
1
Application title
Rheology of glass-filled polypropylene plastics during injection molding
Keyword
NSERC
Application summary
Injection Molding is a manufacturing process for producing parts by injecting molten material (mostly plastics)*into a tool (a mold). Obtaining a defect-free part from an optimized injection molding (IM) process requires a*full understanding and control of the molten material flow, heat transfer between the material and the tool, and*material solidification. Material flow controls filing time and material ability to completely fill the tool. The*rate of heat transfer affects material flowability and its rate of solidification. On one hand, using a high tool*temperature during the tool filling stage of the IM process results in a better quality part, however it extends the*cycle time because longer cooling time will be required. On the other hand, using a low tool temperature during*filling would reduce the cycle time, but it would drastically affect the visual quality and physical properties of*the produced part. The current practice in IM employs a constant tool temperature that is usually determined*through trials for each molten material processed and part geometry, which renders the whole IM process*non-optimal.*This research project is related to the development of an innovative more efficient injection molding process.*The project will be carried out in collaboration with Windsor Mold Group (WMG), which is a Canadian*injection molding company located in Windsor, Ontario. A long-term plan has been developed by the applicant*and WMG to revolutionize the IM process. The main objective of this plan is to optimize the IM process by*using a dual-temperature tool (DTT-IM). The DTT-IM concept involves rapid heating and rapid cooling of the*tool during the filling stage and the cooling stage, respectively. The proposed DTT-IM process will result in*better part quality, less defects, lower cycle time, and higher productivity. The first phase of this long-term plan*is the research proposed in this application which focuses on studying rheology (flowability) of molten*polymers (plastics) at flow conditions and range of temperatures intended for the proposed DTT-IM.