Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Research Tools and Instruments - Category 1 (<$150,000)

University of New Brunswick

$15,142.00

High-speed centrifugal blower for experimental aeroacoustics

EF 2010-11

Résumé
The vortex-shedding phenomenon has been a subject of research since it was observed by Leonardo da Vinci. Vortex shedding occurs due to the boundary layer separation around bluff bodies in cross-flow. The boundary layer separates into two shear layers that trail and roll-up in the near field forming a periodic vortex street. In the case of a duct containing a bluff body such as a circular cylinder, when the vortex shedding frequency coincides with one of the acoustic natural frequencies of the duct, a feedback cycle may occur where the vortex shedding acts as a sound source and excites an acoustic standing wave which, in turn, enhances the shedding process and thereby creates a strong acoustic resonance. This process is known as flow-excited acoustic resonance. In many engineering applications where ducts containing clusters of bluff bodies are encountered, such as tube bundles of heat exchangers and boilers, cascades of compressor blades and guide/turning vanes in ducts and radial diffusers, unfortunate operating conditions could lead to a coincidence between the vortex shedding frequency and one of the acoustic natural frequencies of the duct. This often leads to flow-excited acoustic resonance and the generation of acute noise problems and/or excessive vibrations. Since this phenomenon is not yet fully understood, it can be dangerously unpredictable and may cause catastrophic failures in many applications such as power generation and transport. The main objective of the applicant's research in this area is to understand the feedback cycle of the flow-excited acoustic resonance. This requires the generation of a self-excited acoustic resonance in flow configurations similar to those mentioned above. However, the self-excited acoustic resonance will not materialize unless the flow velocity is sufficiently high to overcome the losses due to acoustic damping.This can only be achieved using the requested centrifugal blower system, which is capable of producing air flow with a velocity as high as 220 m/s in a cross-section area of 10 inch (25.4 cm) by 10 inch (25.4 cm).
Programme
Research Tools and Instruments - Category 1 (<$150,000)
Emplacement
New Brunswick, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
407546-2011
Name nom
Mohany, Atef
Department département
Mechanical Engineering
Organization id
75
Institution établissement
University of New Brunswick
Province en
New Brunswick
Province fr
Nouveau-Brunswick
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2010
Competition year année de concours
2011
Award amount
15142
Program id
EQPEQ
Program name en
Research Tools and Instruments - Category 1 (<$150,000)
Program name fr
Outils et instruments de recherche - catégorie 1 (<150 000$)
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
302
Area of application group en
Energy resources
Area of application group fr
Ressources d'énergie
Area of application en
Nuclear energy
Area of application fr
Énergie nucléaire
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Partie
1
Nb partie
1
Application title
High-speed centrifugal blower for experimental aeroacoustics
Keyword
NSERC
Application summary
The vortex-shedding phenomenon has been a subject of research since it was observed by Leonardo da Vinci. Vortex shedding occurs due to the boundary layer separation around bluff bodies in cross-flow. The boundary layer separates into two shear layers that trail and roll-up in the near field forming a periodic vortex street. In the case of a duct containing a bluff body such as a circular cylinder, when the vortex shedding frequency coincides with one of the acoustic natural frequencies of the duct, a feedback cycle may occur where the vortex shedding acts as a sound source and excites an acoustic standing wave which, in turn, enhances the shedding process and thereby creates a strong acoustic resonance. This process is known as flow-excited acoustic resonance. In many engineering applications where ducts containing clusters of bluff bodies are encountered, such as tube bundles of heat exchangers and boilers, cascades of compressor blades and guide/turning vanes in ducts and radial diffusers, unfortunate operating conditions could lead to a coincidence between the vortex shedding frequency and one of the acoustic natural frequencies of the duct. This often leads to flow-excited acoustic resonance and the generation of acute noise problems and/or excessive vibrations. Since this phenomenon is not yet fully understood, it can be dangerously unpredictable and may cause catastrophic failures in many applications such as power generation and transport. The main objective of the applicant's research in this area is to understand the feedback cycle of the flow-excited acoustic resonance. This requires the generation of a self-excited acoustic resonance in flow configurations similar to those mentioned above. However, the self-excited acoustic resonance will not materialize unless the flow velocity is sufficiently high to overcome the losses due to acoustic damping.This can only be achieved using the requested centrifugal blower system, which is capable of producing air flow with a velocity as high as 220 m/s in a cross-section area of 10 inch (25.4 cm) by 10 inch (25.4 cm).