Grant: Collaborative Research and Development Grants
University of Toronto
$29,500.00
Application of epoxy coatings on the insides of water pipes
EF 2007-08
Résumé
Corrosion of water pipes used in residential and commercial buildings is a very significant problem. Most copper or galvanized pipe systems show significant degradation within a decade, and replacing piping systems in existing building is an extremely expensive process. A new industry is developing in Canada to apply epoxy coatings in existing piping systems in buildings, without having to remove any pipes. Pipes are drained, dried and cleaned, after which a cylinder of liquid epoxy is attached to the pipe entry and blown through the pipes using compressed air. The liquid forms a uniform layer on the walls and cures until it is hard. The coating method is useful for coating straight pipes more than 1" (25 mm) in diameter. However, the epoxy does not spread uniformly, or adhere well, to smaller pipes, or to piping systems containing several bends. There is also little information on how physical properties of the epoxy, such as viscosity and surface tension, affect the application and adhesion process.The University of Toronto in collaboration with Simulent Inc. of Toronto, propose a two-year study of the flow of liquid coating materials inside pipes. The objectives of the project are- To measure the effect of process parameters such as air pressure, temperature, and flow rate; duration of pressure application on epoxy flow and deposition on pipe walls- To determine how pipe diameter, length and orientation (vertical or horizontal) on epoxy flow.- To observe how epoxy flow around fixtures such at T-junctions, elbows and U-bendsThe project will be a novel, fundamental study of transient two-phase flow of liquids. The results will be used to determine the validity of using numerical models in simulating complex two-phase flow. The industrial partner, Simulent Inc. will develop a software package that can be marketed to the pipe-coating industry where it can be used to rapidly optimize application parameters. This is an expanding business opportunity, and Canadian companies will have the tools to become international leaders in this field.
Programme
Collaborative Research and Development Grants
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
346431-2006
Name nom
Chandra, Sanjeev
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2007
Competition year année de concours
2006
Award amount
29500
Program id
CRDPJ
Program name en
Collaborative Research and Development Grants
Program name fr
Subventions de recherche et développement coopérative
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
702
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Water
Area of application fr
Maritime
Research subject code
2202
Research subject group en
Fluid mechanics
Research subject group fr
Mécanique des fluides
Research subject en
Multi-phase systems
Research subject fr
Systèmes polyphasiques
Partie
1
Nb partie
2
Application title
Application of epoxy coatings on the insides of water pipes
Keyword
NA
Application summary
Corrosion of water pipes used in residential and commercial buildings is a very significant problem. Most copper or galvanized pipe systems show significant degradation within a decade, and replacing piping systems in existing building is an extremely expensive process. A new industry is developing in Canada to apply epoxy coatings in existing piping systems in buildings, without having to remove any pipes. Pipes are drained, dried and cleaned, after which a cylinder of liquid epoxy is attached to the pipe entry and blown through the pipes using compressed air. The liquid forms a uniform layer on the walls and cures until it is hard. The coating method is useful for coating straight pipes more than 1" (25 mm) in diameter. However, the epoxy does not spread uniformly, or adhere well, to smaller pipes, or to piping systems containing several bends. There is also little information on how physical properties of the epoxy, such as viscosity and surface tension, affect the application and adhesion process.The University of Toronto in collaboration with Simulent Inc. of Toronto, propose a two-year study of the flow of liquid coating materials inside pipes. The objectives of the project are- To measure the effect of process parameters such as air pressure, temperature, and flow rate; duration of pressure application on epoxy flow and deposition on pipe walls- To determine how pipe diameter, length and orientation (vertical or horizontal) on epoxy flow.- To observe how epoxy flow around fixtures such at T-junctions, elbows and U-bendsThe project will be a novel, fundamental study of transient two-phase flow of liquids. The results will be used to determine the validity of using numerical models in simulating complex two-phase flow. The industrial partner, Simulent Inc. will develop a software package that can be marketed to the pipe-coating industry where it can be used to rapidly optimize application parameters. This is an expanding business opportunity, and Canadian companies will have the tools to become international leaders in this field.