Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

University of Toronto

$39,000.00

Hierarchical Biofabrication of Load-Bearing Biomaterial Structures

EF 2024-25

Résumé
Fueled by advances in 3D printing, biomaterials science, microfabrication technology, protein engineering, cell biology and green chemistry, biofabrication strategies have rapidly progressed during the past ten years. However, many limitations remain and Nature's ability to routinely define hierarchical structures that span up to seven orders of spatial magnitude is far from being matched. For the most part, the demonstrated bioprinted structures are smaller than one centimeter, have material properties that are directionally independent and do not withstand physiological tensile and compressive loading forces. Here, we aim to overcome these limitations and establish the scientific foundation for the biofabrication of hierarchically organized structures that exhibit non-linear and directionally dependent behavior and withstand physiological loading forces. We will demonstrate the rapid fabrication of planar and hollow biomaterial structures, that are stretchable yet handleable, and provide tailored transport characteristics. Sterile roll-to-roll processing will allow us to prepare up to 100m-long ultrathin sheets from different polysaccharide and protein-based biopolymers with consistent tensile properties and degradation behavior during less than four hours. We will flow synthesize granular bioinks with excellent printing behavior and explore strategies to enhance the fluidity to enable the consistent delivery through single- and multinozzle printheads. Custom tape-laying printheads will enable us to concurrently deliver aligned sheets along with granular bioinks. With these approaches, we will prepare cm-sized lamellar and angle-ply structures by sequentially depositing multiple aligned biopolymer sheets, either alone or concurrently with bioinks. Anisotropic compressive and tensile properties, as well as molecular and photon transport characteristics will be determined. Moving the tape laying printheads along pre-planned paths conformal to curvilinear surfaces will enable the biofabrication of up to 20cm-sized load-bearing structures. We will define tubular and other hollow structures with walls that are initially soft but become at least tenfold stiffer when strained. We will investigate the multiscale structure-property relationships of the obtained biomaterial structures with a combination of experiments and numerical models. The developed multiscale biofabrication approaches are platform technologies that will rapidly produce load-bearing biomaterial structures for a wide-range of applications. Examples include implantable biohybrid and biodegradable devices, robotic-tissue and bioreactor-tissue interfaces, bioartificial leather, and biomaterial-based biliary, bone, corneal and vascular grafts. This proposed research program promises contributions to the areas of biofabrication and extrusion bioprinting, expands the capabilities of additive manufacturing platforms and an improved understanding of confined granular flows.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
RGPIN-2024-06528
Name nom
Guenther, Axel
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2024
Competition year année de concours
2024
Award amount
39000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
1102
Area of application group en
Health, education and social services
Area of application group fr
Santé publique, éducation et services sociaux
Area of application en
Biomedical engineering
Area of application fr
Génie biomédical
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Field of research list names en
Not available
Field of research list names fr
Non disponible
Socioeconomic objective list names en
Not available
Socioeconomic objective list names fr
Non disponible
Application title
Hierarchical Biofabrication of Load-Bearing Biomaterial Structures
Keywords
biofabrication; microfluidics; rheology; granular materials; complex fluids; tissue engineering; biomechanics; microfabrication; roll-to-roll processing
Application summary
Fueled by advances in 3D printing, biomaterials science, microfabrication technology, protein engineering, cell biology and green chemistry, biofabrication strategies have rapidly progressed during the past ten years. However, many limitations remain and Nature's ability to routinely define hierarchical structures that span up to seven orders of spatial magnitude is far from being matched. For the most part, the demonstrated bioprinted structures are smaller than one centimeter, have material properties that are directionally independent and do not withstand physiological tensile and compressive loading forces. Here, we aim to overcome these limitations and establish the scientific foundation for the biofabrication of hierarchically organized structures that exhibit non-linear and directionally dependent behavior and withstand physiological loading forces. We will demonstrate the rapid fabrication of planar and hollow biomaterial structures, that are stretchable yet handleable, and provide tailored transport characteristics. Sterile roll-to-roll processing will allow us to prepare up to 100m-long ultrathin sheets from different polysaccharide and protein-based biopolymers with consistent tensile properties and degradation behavior during less than four hours. We will flow synthesize granular bioinks with excellent printing behavior and explore strategies to enhance the fluidity to enable the consistent delivery through single- and multinozzle printheads. Custom tape-laying printheads will enable us to concurrently deliver aligned sheets along with granular bioinks. With these approaches, we will prepare cm-sized lamellar and angle-ply structures by sequentially depositing multiple aligned biopolymer sheets, either alone or concurrently with bioinks. Anisotropic compressive and tensile properties, as well as molecular and photon transport characteristics will be determined. Moving the tape laying printheads along pre-planned paths conformal to curvilinear surfaces will enable the biofabrication of up to 20cm-sized load-bearing structures. We will define tubular and other hollow structures with walls that are initially soft but become at least tenfold stiffer when strained. We will investigate the multiscale structure-property relationships of the obtained biomaterial structures with a combination of experiments and numerical models. The developed multiscale biofabrication approaches are platform technologies that will rapidly produce load-bearing biomaterial structures for a wide-range of applications. Examples include implantable biohybrid and biodegradable devices, robotic-tissue and bioreactor-tissue interfaces, bioartificial leather, and biomaterial-based biliary, bone, corneal and vascular grafts. This proposed research program promises contributions to the areas of biofabrication and extrusion bioprinting, expands the capabilities of additive manufacturing platforms and an improved understanding of confined granular flows.