Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

Dalhousie University

$38,000.00

Multi-material Additive Manufacturing of Advanced Ceramics

EF 2023-24

Résumé
Advanced ceramics are used in a diverse selection of industries important to the Canadian economy, including transportation, chemical processing, defence, mining, healthcare, etc. However, their implementation is often held back by manufacturing challenges, especially in terms of producing complex-shaped components. While in its infancy, ceramic additive manufacturing (AM) offers significant potential to circumvent this issue. As the `additive' term infers, AM techniques involve `layer-by-layer' addition of material to build a 3D, complex-shaped part. An important future aspect will be multi-material AM, applied directly within the printing method itself. The proposed research will involve development of cost-efficient, industry transferable technologies for AM of advanced ceramics, focusing on the use of `stabilised' powder suspensions; the 3D printed components are then densified through a secondary processing step (e.g., sintering, melt-infiltration, etc.). The AM `process-flow' is thus very similar to conventional ceramic manufacturing (i.e., shaping-densification-finishing). Digital light processing (DLP), using a ceramic suspension based on a photo-polymerizable support medium, will be used in multi-material scenarios. DLP illuminates a specific area within each thin suspension layer during the build. Initially this work will investigate simple oxide baseline ceramics. Ultimately, multi-material combinations of Al2O3/ZrO2 and Al2O3/MgAl2O4 will be examined. Two materials can be `blended' during the build, processed in an alternating layer manner, added in isolated regions within the same layer, or some combination of these. However, multi-material DLP is still very new, so a range of architectures will be examined to assess feasibility. A key aspect will be evaluation of microstructure development during sintering and the evolution of mechanical properties, for example when deliberately designing-in compressive residual stress. A second suspension-based AM approach is laser induced slip casting (LIS), a novel technique only recently commercialised (2022); we will install one of the first systems in North America in early 2023. LIS uses a laser to rapidly heat an aqueous suspension, thereby drying it and removing water in a manner akin to slip casting. An important feature of LIS is that it is receptive to processing dark ceramic powders, unlike lithography-based methods such as DLP. We will initially examine LIS processing of fine SiC (<1 µm) powders to assess the effects of LIS parameters on the 3D component characteristics, as with DLP. The outlined research will provide a significant increase in the fundamental understanding of AM processes as applied to advanced ceramics. In particular, using industrially important materials, we will develop approaches for successfully processing a range of oxide, non-oxide, and composite systems, with the aim of achieving target mechanical properties exceeding current dry-pressed equivalent materials.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Nova Scotia, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
RGPIN-2023-03385
Name nom
Plucknett, Kevin
Department département
Mechanical Engineering
Organization id
79
Institution établissement
Dalhousie University
Province en
Nova Scotia
Province fr
Nouvelle-Écosse
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2023
Competition year année de concours
2023
Award amount
38000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2002
Research subject group en
Materials science and technology
Research subject group fr
Materials processing
Research subject en
Science et technologie des matériaux
Research subject fr
Transformation des matériaux
Application title
Multi-material Additive Manufacturing of Advanced Ceramics
Keyword
Digital light processing (DLP); Electron microscopy; Engineering ceramics; Functional ceramics; Functionally gradient materials (FGM); Laser induced slip-casting (LIS); Mechanical behaviour; Nanoindentation; Suspension rheology; Ultra-fast high-temperature sintering (UHS)
Application summary
Advanced ceramics are used in a diverse selection of industries important to the Canadian economy, including transportation, chemical processing, defence, mining, healthcare, etc. However, their implementation is often held back by manufacturing challenges, especially in terms of producing complex-shaped components. While in its infancy, ceramic additive manufacturing (AM) offers significant potential to circumvent this issue. As the `additive' term infers, AM techniques involve `layer-by-layer' addition of material to build a 3D, complex-shaped part. An important future aspect will be multi-material AM, applied directly within the printing method itself. The proposed research will involve development of cost-efficient, industry transferable technologies for AM of advanced ceramics, focusing on the use of `stabilised' powder suspensions; the 3D printed components are then densified through a secondary processing step (e.g., sintering, melt-infiltration, etc.). The AM `process-flow' is thus very similar to conventional ceramic manufacturing (i.e., shaping-densification-finishing). Digital light processing (DLP), using a ceramic suspension based on a photo-polymerizable support medium, will be used in multi-material scenarios. DLP illuminates a specific area within each thin suspension layer during the build. Initially this work will investigate simple oxide baseline ceramics. Ultimately, multi-material combinations of Al2O3/ZrO2 and Al2O3/MgAl2O4 will be examined. Two materials can be `blended' during the build, processed in an alternating layer manner, added in isolated regions within the same layer, or some combination of these. However, multi-material DLP is still very new, so a range of architectures will be examined to assess feasibility. A key aspect will be evaluation of microstructure development during sintering and the evolution of mechanical properties, for example when deliberately designing-in compressive residual stress. A second suspension-based AM approach is laser induced slip casting (LIS), a novel technique only recently commercialised (2022); we will install one of the first systems in North America in early 2023. LIS uses a laser to rapidly heat an aqueous suspension, thereby drying it and removing water in a manner akin to slip casting. An important feature of LIS is that it is receptive to processing dark ceramic powders, unlike lithography-based methods such as DLP. We will initially examine LIS processing of fine SiC (<1 µm) powders to assess the effects of LIS parameters on the 3D component characteristics, as with DLP. The outlined research will provide a significant increase in the fundamental understanding of AM processes as applied to advanced ceramics. In particular, using industrially important materials, we will develop approaches for successfully processing a range of oxide, non-oxide, and composite systems, with the aim of achieving target mechanical properties exceeding current dry-pressed equivalent materials.