Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Engage Grants Program

University of Toronto

$24,930.00

EMAT nondestructive testing system for inspecting inaccessible piping installations

EF 2012-13

Résumé
Ultrasound is frequently used to test industrial piping systems for defects such as cracks or corrosion. This type of task can pose a particular challenge if the piping system is not readily accessible, for example, pipes that are covered with insulation to prevent heat loss (steam pipes), or pipes that run through concrete walls, or pipes inside a ceiling with no convenient access ports. We are proposing to develop an imbedded ultrasonic inspection system with key transducer components that are left permanently attached directly to the pipe (underneath any insulation). Ultrasonic inspections can then be conducted by hooking up portable instruments to electrical leads protruding through the insulation from the transducers. The system will send ultrasonic waves along the pipe, which will send echoes back from any significant flaws. It is proposed that the inspection system be based on a ""collar"" of electromagnetic acoustic transducers (EMATs). EMATSs are not widely used due to their characteristically weak signals and poor resolution compared to piezoelectric transducers. However, we propose to boost the signal power by use of a magnetostrictive mechanism, applied to Terfanol foils mounted on the pipe. The main advantage gained by using EMATs is that there is excellent control available on the mode and directionality of the generated ultrasonic wave. We propose to use the torsion wave mode, designated as T(0,1), which propagates along the pipe without any distortion or loss of resolution - this mode cannot be readily generated by piezoelectric transducers. Considerable modeling and design work is required to optimize the EMAT and collar design, select the pulse input profile, and generate an appropriate signal processing strategy.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
431601-2012
Name nom
Sinclair, Anthony
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2012
Competition year année de concours
2012
Award amount
24930
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
602
Area of application group en
Construction, urban and rural planning
Area of application group fr
Construction, urbanisme et aménagement rural
Area of application en
Materials performance
Area of application fr
Performance des matériaux
Research subject code
2109
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical systems and instrumentation
Research subject fr
Instrumentation et systèmes mécaniques
Partie
1
Nb partie
1
Application title
EMAT nondestructive testing system for inspecting inaccessible piping installations
Keyword
NSERC
Application summary
Ultrasound is frequently used to test industrial piping systems for defects such as cracks or corrosion. This type of task can pose a particular challenge if the piping system is not readily accessible, for example, pipes that are covered with insulation to prevent heat loss (steam pipes), or pipes that run through concrete walls, or pipes inside a ceiling with no convenient access ports. We are proposing to develop an imbedded ultrasonic inspection system with key transducer components that are left permanently attached directly to the pipe (underneath any insulation). Ultrasonic inspections can then be conducted by hooking up portable instruments to electrical leads protruding through the insulation from the transducers. The system will send ultrasonic waves along the pipe, which will send echoes back from any significant flaws. It is proposed that the inspection system be based on a ""collar"" of electromagnetic acoustic transducers (EMATs). EMATSs are not widely used due to their characteristically weak signals and poor resolution compared to piezoelectric transducers. However, we propose to boost the signal power by use of a magnetostrictive mechanism, applied to Terfanol foils mounted on the pipe. The main advantage gained by using EMATs is that there is excellent control available on the mode and directionality of the generated ultrasonic wave. We propose to use the torsion wave mode, designated as T(0,1), which propagates along the pipe without any distortion or loss of resolution - this mode cannot be readily generated by piezoelectric transducers. Considerable modeling and design work is required to optimize the EMAT and collar design, select the pulse input profile, and generate an appropriate signal processing strategy.