Grant: Discovery Grants Program - Individual
University of Western Ontario
$27,000.00
Engineering and Design of Upper Limb Joint Arthroplasties with Special Interest in Tribology, Load Transfer, and Contact Mechanics
EF 2021-22
Résumé
Joint arthroplasty replaces damaged cartilage with articulating implants to alleviate pain and restore motion. However, failure of these devices in the body results in the need for costly and painful revision surgery to replace the implant. To reduce this risk, the current research proposal aims to investigate and address several of the most common upper limb arthroplasty implant failure modes with the aim of improving implant design and the long-term goal of improving the quality of life of Canadians and reducing cost to the healthcare system. Furthermore, moving forward the resulting research methodologies developed herein can also be extended to other emerging areas of orthopaedics. Reverse total shoulder arthroplasty (RTSA) is growing in use, however articular wear and scapular notching remain a concern. While the use of cross-linked polyethylene (XLPE) has reduced wear in hip arthroplasty, the tribological performance of both XLPE and non-XLPE in RTSA has not been fully explored for varying loads. To address this, a shoulder wear simulator will be used to perform wear testing of XLPE and non-XLPE humeral cups subjected to normal and adverse loads. Scapular notching arises due to contact of the humeral cup with the scapula, which could be prevented if humeral cups had an inferomedial cut-out. To assess the feasibility of this concept, finite element modelling will be used to estimate the degree of cut-out that can be removed without significantly altering contact mechanics, and the resulting cut-outs will then be made on humeral cups and subjected to wear testing to assess their impact on RTSA wear. Radial head hemiarthroplasty (RHH) replaces only one side of the joint, however the substitution of cartilage with a stiff metallic implant results in degeneration of the opposing cartilage. The use of new RHH materials may help to reduce this, however their tribological performance against cartilage is not fully understood. To address this, wear testing of Bionate, a compliant material, and pyrolytic carbon (PyC), a smooth reduced modulus material, will be performed using an OrthoPOD wear apparatus. The long-term fatigue of Bionate and the tribological performance of PyC against cartilage will be evaluated. Humeral stress shielding following shoulder arthroplasty is common and is a result of the unloading of bone following insertion of a stiff metallic humeral stem. Although humeral stem design has been improved somewhat, the optimal short stem geometry has yet to be defined. To address this, humeral stem geometry will be optimized using finite element methods employing a novel modelling technique which permits the estimation of expected stress shielding following stem implantation. The proposed innovative research program incorporates several novel approaches to advance the tribology and design of upper limb arthroplasty, contributing to the long-term vision of improving patient outcomes and quality of life while reducing healthcare costs.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
RGPIN-2019-05346
Name nom
Langohr, Gordon Daniel
Department département
Mechanical and Materials Engineering
Organization id
36
Institution établissement
University of Western Ontario
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2021
Competition year année de concours
2019
Award amount
27000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
1102
Area of application group en
Health, education and social services
Area of application group fr
Santé publique, éducation et services sociaux
Area of application en
Biomedical engineering
Area of application fr
Génie biomédical
Research subject code
2101
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Solid mechanics
Research subject fr
Mécanique des solides
Installment
inst:3
Partie
1
Nb partie
5
Application title
Engineering and Design of Upper Limb Joint Arthroplasties with Special Interest in Tribology, Load Transfer, and Contact Mechanics
Keyword
NSERC
Application summary
Joint arthroplasty replaces damaged cartilage with articulating implants to alleviate pain and restore motion. However, failure of these devices in the body results in the need for costly and painful revision surgery to replace the implant. To reduce this risk, the current research proposal aims to investigate and address several of the most common upper limb arthroplasty implant failure modes with the aim of improving implant design and the long-term goal of improving the quality of life of Canadians and reducing cost to the healthcare system. Furthermore, moving forward the resulting research methodologies developed herein can also be extended to other emerging areas of orthopaedics. Reverse total shoulder arthroplasty (RTSA) is growing in use, however articular wear and scapular notching remain a concern. While the use of cross-linked polyethylene (XLPE) has reduced wear in hip arthroplasty, the tribological performance of both XLPE and non-XLPE in RTSA has not been fully explored for varying loads. To address this, a shoulder wear simulator will be used to perform wear testing of XLPE and non-XLPE humeral cups subjected to normal and adverse loads. Scapular notching arises due to contact of the humeral cup with the scapula, which could be prevented if humeral cups had an inferomedial cut-out. To assess the feasibility of this concept, finite element modelling will be used to estimate the degree of cut-out that can be removed without significantly altering contact mechanics, and the resulting cut-outs will then be made on humeral cups and subjected to wear testing to assess their impact on RTSA wear. Radial head hemiarthroplasty (RHH) replaces only one side of the joint, however the substitution of cartilage with a stiff metallic implant results in degeneration of the opposing cartilage. The use of new RHH materials may help to reduce this, however their tribological performance against cartilage is not fully understood. To address this, wear testing of Bionate, a compliant material, and pyrolytic carbon (PyC), a smooth reduced modulus material, will be performed using an OrthoPOD wear apparatus. The long-term fatigue of Bionate and the tribological performance of PyC against cartilage will be evaluated. Humeral stress shielding following shoulder arthroplasty is common and is a result of the unloading of bone following insertion of a stiff metallic humeral stem. Although humeral stem design has been improved somewhat, the optimal short stem geometry has yet to be defined. To address this, humeral stem geometry will be optimized using finite element methods employing a novel modelling technique which permits the estimation of expected stress shielding following stem implantation. The proposed innovative research program incorporates several novel approaches to advance the tribology and design of upper limb arthroplasty, contributing to the long-term vision of improving patient outcomes and quality of life while reducing healthcare costs.