Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

École de technologie supérieure

$28,000.00

Development of low-pressure powder injection molding feedstocks to increase the moldability of metallic complex shape parts

EF 2019-20

Résumé
CONTEXT: Low-pressure powder injection molding (LPIM) is an advanced manufacturing process used for the cost-effective and small series fabrication of net-shape components with similar metal casting shape complexity. The technology takes advantage of low-viscosity feedstocks (wax-based binder mixed with powder) to achieve high moldability during the injection step. During the subsequent debinding and sintering treatments, the binder is completely removed from the green part to obtain a dense metallic part. According to the Metal Powder Industries Federation, the market for metal injection molding powders in North America grew by an impressive 510% between 2009 and 2017.***Initially used in ceramics shaping, the LPIM process rapidly became attractive for the rapid manufacture of metallic parts in the automotive, aerospace and medical industries. However, the optimization of mechanical properties has been performed with feedstocks whose optimal moldability has not been demonstrated. Therefore, realizing the full potential of the LPIM process is limited by a poor understanding of the mechanisms underlying the moldability of low-viscosity feedstocks, resulting directly from a lack of fundamental knowledge on the rheological behavior of these mixtures. Today, modeling the rheological behavior of the LPIM feedstocks poses many challenges due to the complex interactions between binders and shear thinning behavior of such mixtures.******OBJECTIVES: The general objectives of this Discovery Grant proposal are to improve fundamental knowledge on the moldability of low-viscosity feedstocks, and to develop new experimental and simulation tools for predicting the flow behavior of LPIM feedstocks during the injection process. This will be achieved by developing an experimental method to study the moldability of wax-based feedstocks (objective #1), which will then be used to develop and validate a numerical model simulating the injection process (objective #2). Finally, the new numerical model will be exploited to identify the candidate feedstocks demonstrating the best moldability properties which will be then processed (debinding and sintering) in order to evaluate the mechanical properties of LPIM manufactured parts (objective #3).******OUTCOMES: These LPIM research efforts have the potential to change and influence some process engineering practices by offering an innovative manufacturing method that could lead to real breakthroughs for producing complex shape parts from hard metallic materials with the proper dimensional tolerances, which is one of the main goals of the Canadian manufacturing industry. The impact of this research program will also be felt in the form of training of highly qualified people, results dissemination in open access repositories, and technology transfer in competitive key areas, such as the aerospace, petroleum, health technologies, and many more sectors.**
Programme
Discovery Grants Program - Individual
Emplacement
Quebec, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
RGPIN-2018-04407
Name nom
Demers, Vincent
Department département
Génie mécanique
Organization id
53
Institution établissement
École de technologie supérieure
Province en
Québec
Province fr
Québec
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2019
Competition year année de concours
2018
Award amount
28000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
DISCOVERY RESEARCH
Group fr
RECHERCHE AXÉE SUR LA DÉCOUVERTE
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
703
Area of application group en
Transportation systems and services
Area of application group fr
Services et systèmes de transport
Area of application en
Aerospace
Area of application fr
Aérospatial
Research subject code
2003
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Metallurgy
Research subject fr
Métallurgie
Installment
NA
Partie
0
Nb partie
NA
Application title
Development of low-pressure powder injection molding feedstocks to increase the moldability of metallic complex shape parts
Keyword
NSERC
Application summary
CONTEXT: Low-pressure powder injection molding (LPIM) is an advanced manufacturing process used for the cost-effective and small series fabrication of net-shape components with similar metal casting shape complexity. The technology takes advantage of low-viscosity feedstocks (wax-based binder mixed with powder) to achieve high moldability during the injection step. During the subsequent debinding and sintering treatments, the binder is completely removed from the green part to obtain a dense metallic part. According to the Metal Powder Industries Federation, the market for metal injection molding powders in North America grew by an impressive 510% between 2009 and 2017.***Initially used in ceramics shaping, the LPIM process rapidly became attractive for the rapid manufacture of metallic parts in the automotive, aerospace and medical industries. However, the optimization of mechanical properties has been performed with feedstocks whose optimal moldability has not been demonstrated. Therefore, realizing the full potential of the LPIM process is limited by a poor understanding of the mechanisms underlying the moldability of low-viscosity feedstocks, resulting directly from a lack of fundamental knowledge on the rheological behavior of these mixtures. Today, modeling the rheological behavior of the LPIM feedstocks poses many challenges due to the complex interactions between binders and shear thinning behavior of such mixtures.******OBJECTIVES: The general objectives of this Discovery Grant proposal are to improve fundamental knowledge on the moldability of low-viscosity feedstocks, and to develop new experimental and simulation tools for predicting the flow behavior of LPIM feedstocks during the injection process. This will be achieved by developing an experimental method to study the moldability of wax-based feedstocks (objective #1), which will then be used to develop and validate a numerical model simulating the injection process (objective #2). Finally, the new numerical model will be exploited to identify the candidate feedstocks demonstrating the best moldability properties which will be then processed (debinding and sintering) in order to evaluate the mechanical properties of LPIM manufactured parts (objective #3).******OUTCOMES: These LPIM research efforts have the potential to change and influence some process engineering practices by offering an innovative manufacturing method that could lead to real breakthroughs for producing complex shape parts from hard metallic materials with the proper dimensional tolerances, which is one of the main goals of the Canadian manufacturing industry. The impact of this research program will also be felt in the form of training of highly qualified people, results dissemination in open access repositories, and technology transfer in competitive key areas, such as the aerospace, petroleum, health technologies, and many more sectors.**