Grant: Collaborative Research and Development Grants
University of Toronto
$42,858.00
Development of Ni-based alloy foams
EF 2009-10
Résumé
With regard to fuel consumption, a diesel engine is more efficient than its gasoline counterpart. With an increased use of diesel engines, regulations on diesel emissions are becoming tougher. These emissions, however, can be restricted by employing after-treatment devices such as diesel particulate filters (DPFs). Currently, three types of filters are available for the reduction of particulate emissions of diesel passenger cars and trucks: (1) segmented SiC filters; (2) cordierite filters; and (3) metal-based filters. In this context, the present proposal aims at developing a new class of materials based on nickel-alloy foams for use in DPFs. The following salient features are envisioned: (i) a uniform pore size of approximately 200 micrometers (±100 µm) and a bimodal pore size in the range of 20-1000 micrometers; (ii) a porosity in the range of 80-95% without significant sacrifice of the mechanical properties; and (iii) a uniform coating of a metal alloy over the porous Ni structure. The above-mentioned material will be produced with a novel processing technique. A cellular structure will be created by foaming a polymer, such as methyl cellulose, with Ni/Alloy powders using surfactant in order to achieve a high void fraction. This is followed by sintering, during which the polymer is flashed off to create void fractions with the nickel, thereby forming a skeleton over which the alloy powder is condensed as a uniform layer. The overall approach consists in marrying the foam processing technology available at the Microcellular Plastics Manufacturing Laboratory at the University of Toronto with the powder sintering technology available at Vale Inco Ltd. Three steps will be involved: 1. The development of foamable cellulose/nickel powder/alloy powder mixtures; 2. The foaming process of the above mixture; 3. The removal of cellulose and the formation of Ni-alloy foams by sintering. Both the product evolution and the processing technology development in each step, i.e., in the preparation of wet foams, green cakes, and sintered foams, will be considered.
Programme
Collaborative Research and Development Grants
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
379649-2008
Name nom
Park, Chul
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2009
Competition year année de concours
2008
Award amount
42858
Program id
CRDPJ
Program nane en
Collaborative Research and Development Grants
Program name fr
Subventions de recherche et développement coopérative
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2000
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials science and technology
Research subject fr
Science et technologie des matériaux
Partie
1
Nb partie
2
Application title
Development of Ni-based alloy foams
Keyword
NA
Application summary
With regard to fuel consumption, a diesel engine is more efficient than its gasoline counterpart. With an increased use of diesel engines, regulations on diesel emissions are becoming tougher. These emissions, however, can be restricted by employing after-treatment devices such as diesel particulate filters (DPFs). Currently, three types of filters are available for the reduction of particulate emissions of diesel passenger cars and trucks: (1) segmented SiC filters; (2) cordierite filters; and (3) metal-based filters. In this context, the present proposal aims at developing a new class of materials based on nickel-alloy foams for use in DPFs. The following salient features are envisioned: (i) a uniform pore size of approximately 200 micrometers (±100 µm) and a bimodal pore size in the range of 20-1000 micrometers; (ii) a porosity in the range of 80-95% without significant sacrifice of the mechanical properties; and (iii) a uniform coating of a metal alloy over the porous Ni structure. The above-mentioned material will be produced with a novel processing technique. A cellular structure will be created by foaming a polymer, such as methyl cellulose, with Ni/Alloy powders using surfactant in order to achieve a high void fraction. This is followed by sintering, during which the polymer is flashed off to create void fractions with the nickel, thereby forming a skeleton over which the alloy powder is condensed as a uniform layer. The overall approach consists in marrying the foam processing technology available at the Microcellular Plastics Manufacturing Laboratory at the University of Toronto with the powder sintering technology available at Vale Inco Ltd. Three steps will be involved: 1. The development of foamable cellulose/nickel powder/alloy powder mixtures; 2. The foaming process of the above mixture; 3. The removal of cellulose and the formation of Ni-alloy foams by sintering. Both the product evolution and the processing technology development in each step, i.e., in the preparation of wet foams, green cakes, and sintered foams, will be considered.