Grant: Idea to Innovation
University of Toronto
$15,000.00
Thermal Spray Deposition Technology for Production of Complex Heat Transfer Devices
EF 2022-23
Résumé
Electronic circuits dissipate most of the electrical energy they receive as heat, which must be removed. Circuit boards are mounted on metal plates that have internal passages through which water is circulated. Research into the design of flow passages has shown that heat transfer increases as the channel diameter is reduced, but this increases the pressure drop through them. Also, it is difficult to drill networks of small diameter (< 1mm) channels using conventional techniques. We have developed a new method of fabricating cooling channels in copper and aluminum plates using thermal spray techniques. Channels are milled on the surface of a metal plate in any desired pattern. Inserts in the exact shape of the channels are made using a 3D printer out of a water-soluble polymer. The inserts are placed in the channels and molten metal is sprayed on the surface of the metal plate using a twin wire-arc system. The plate is then placed in an ultrasonic water bath for several hours to dissolve the polymer inserts, leaving open the channels under the sprayed surface. The plates fabricated were found to provide significantly higher heat transfer than commercial cold plates. It was possible to machine multiple passes of the cooling channel in the same plate area, increasing the surface area wetted by the liquid. A longer flow path, and multiple bends in the channel, promoted turbulence in the flow and enhanced heat transfer. This technique can be used to make novel designs of cold plates that can be optimized for specific circuit board layouts. We can make channels on the surface of curved cooling plates, which is important for applications such as battery cooling. This Market Assessment Proposal will help identify commercial demand for this technology in making cooling systems that can be used in the computer, automotive and other industries.
Programme
Idea to Innovation
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
571985-2022
Name nom
Chandra, Sanjeev SC
Department département
Mechanical and Industrial Engineering
Organization id
31
Institution établissement
University of Toronto
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2022
Competition year année de concours
2022
Award amount
15000
Program id
I2IPJ
Program name en
Idea to Innovation
Program name fr
De l'idée à l'innovation
Group en
RESEARCH PARTNERSHIPS
Group fr
PARTENARIATS DE RECHERCHE
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
510
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Fabricated metal products
Area of application fr
Produits métalliques usinés
Research subject code
2002
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Materials processing
Research subject fr
Transformation des matériaux
Installment
inst:1
Partie
1
Nb partie
1
Application title
Thermal Spray Deposition Technology for Production of Complex Heat Transfer Devices
Application summary
Electronic circuits dissipate most of the electrical energy they receive as heat, which must be removed. Circuit boards are mounted on metal plates that have internal passages through which water is circulated. Research into the design of flow passages has shown that heat transfer increases as the channel diameter is reduced, but this increases the pressure drop through them. Also, it is difficult to drill networks of small diameter (< 1mm) channels using conventional techniques. We have developed a new method of fabricating cooling channels in copper and aluminum plates using thermal spray techniques. Channels are milled on the surface of a metal plate in any desired pattern. Inserts in the exact shape of the channels are made using a 3D printer out of a water-soluble polymer. The inserts are placed in the channels and molten metal is sprayed on the surface of the metal plate using a twin wire-arc system. The plate is then placed in an ultrasonic water bath for several hours to dissolve the polymer inserts, leaving open the channels under the sprayed surface. The plates fabricated were found to provide significantly higher heat transfer than commercial cold plates. It was possible to machine multiple passes of the cooling channel in the same plate area, increasing the surface area wetted by the liquid. A longer flow path, and multiple bends in the channel, promoted turbulence in the flow and enhanced heat transfer. This technique can be used to make novel designs of cold plates that can be optimized for specific circuit board layouts. We can make channels on the surface of curved cooling plates, which is important for applications such as battery cooling. This Market Assessment Proposal will help identify commercial demand for this technology in making cooling systems that can be used in the computer, automotive and other industries.