Grant: Collaborative Research and Development Grants
University of Alberta
$17,329.00
Miniaturized dipole antennas for ground-penetrating radar using metamaterial techniques
EF 2017-18
Résumé
The goal of this project is to examine the feasibility of miniaturized, metamaterial-based dipole antennas in replacing the large dipole antennas in existing ground-penetrating radar (GPR) systems, while examining the effect of `metamaterialization' on pulse dispersion, antenna-current distributions, radiation pattern, bandwidth, radiation efficiency, and polarization purity. The negative-refractive-index transmission-line (NRI-TL) metamaterial has proven itself effective in miniaturizing devices whose performance relies on their size with respect to the wavelength of operation. The NRI-TL approach is ideally suited to high-frequency planar PCB TL technologies, such as microstrip, and has enabled the development of miniaturized microstrip couplers, dividers, baluns, and even miniaturized printed dipole antennas. However, these planar metamaterial technologies may be unsuitable for the high-voltage or low-frequency conditions associated with GPR systems. GPR can operate at frequencies as low as the tens of megahertz, requiring antennas that can be several metres long. Typically, these antennas are simple wire dipole antennas, and their miniaturization will necessitate the development and characterization of a suitable metamaterial topology capable of handling high-voltage signals at scaled-down frequencies. Furthermore, GPR is based on the delivery of pulses, which consist of a spectrum of frequency components. The designed metamaterial technology must also, therefore, provide broadband performance. However, the same property which enables metamaterials to provide miniaturization also introduces strong frequency dispersion, and this must be adequately characterized and compensated for by either pre- or post-processing both the transmitted and received signals according to the known frequency dispersion of the designed metamaterial. In summary, this project will investigate robust NRI-TL metamaterial topologies aimed at GPR-antenna miniaturization and will devote significant time to the theoretical investigation of pulse dispersion, recovery, and dispersion compensation.
Programme
Collaborative Research and Development Grants
Bénéficiaire
Emplacement
Alberta, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
465415-2014
Name nom
Iyer, Ashwin
Department département
Engineering, Faculty of
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2017
Competition year année de concours
2014
Award amount
17329
Program id
CRDPJ
Program name en
Collaborative Research and Development Grants
Program name fr
Subventions de recherche et développement coopérative
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
96
Committee name en
RPP Internal Decision Cttee
Committee name fr
Cté de décision interne - PPR
Area of application code
805
Area of application group en
Information and communication services
Area of application group fr
Services d'information et de télécommunications
Area of application en
Communications technologies (satellites, radar, etc.)
Area of application fr
Technologie des télécommunications (satellites, radar,etc.)
Research subject code
2511
Research subject group en
Electrical and electronic engineering
Research subject group fr
Génie électrique et électronique
Research subject en
Antennas and propagation
Research subject fr
Antennes et propagation
Partie
4
Nb partie
4
Application title
Miniaturized dipole antennas for ground-penetrating radar using metamaterial techniques
Keyword
NSERC
Application summary
The goal of this project is to examine the feasibility of miniaturized, metamaterial-based dipole antennas in replacing the large dipole antennas in existing ground-penetrating radar (GPR) systems, while examining the effect of `metamaterialization' on pulse dispersion, antenna-current distributions, radiation pattern, bandwidth, radiation efficiency, and polarization purity. The negative-refractive-index transmission-line (NRI-TL) metamaterial has proven itself effective in miniaturizing devices whose performance relies on their size with respect to the wavelength of operation. The NRI-TL approach is ideally suited to high-frequency planar PCB TL technologies, such as microstrip, and has enabled the development of miniaturized microstrip couplers, dividers, baluns, and even miniaturized printed dipole antennas. However, these planar metamaterial technologies may be unsuitable for the high-voltage or low-frequency conditions associated with GPR systems. GPR can operate at frequencies as low as the tens of megahertz, requiring antennas that can be several metres long. Typically, these antennas are simple wire dipole antennas, and their miniaturization will necessitate the development and characterization of a suitable metamaterial topology capable of handling high-voltage signals at scaled-down frequencies. Furthermore, GPR is based on the delivery of pulses, which consist of a spectrum of frequency components. The designed metamaterial technology must also, therefore, provide broadband performance. However, the same property which enables metamaterials to provide miniaturization also introduces strong frequency dispersion, and this must be adequately characterized and compensated for by either pre- or post-processing both the transmitted and received signals according to the known frequency dispersion of the designed metamaterial. In summary, this project will investigate robust NRI-TL metamaterial topologies aimed at GPR-antenna miniaturization and will devote significant time to the theoretical investigation of pulse dispersion, recovery, and dispersion compensation.