Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Discovery Grants Program - Individual

University of Waterloo

$23,000.00

Tool path planning and chatter avoidance in curved surfaces machining

EF 2014-15

Résumé
The objective of this proposal is to conduct fundamental investigations and to develop strategies for tool path planning in machining of curved surfaces. Such surfaces are encountered in numerous industrial parts like turbine blades, impellers, and tools and dies. Milling operations of these surfaces, especially in the semi-finishing and finishing stages, consume considerable time. A significant value has already been added by the time the part is ready for these operations. Research conducted by the applicant has shown that there is a need for developing tool path strategies to avoid chatter at those later stages while maximizing the metal removal rate and generating the surface at required roughness. A critical factor in developing a chatter model is to include process damping. This damping arises in machining materials, like Titanium, at low speeds. The applicant has successfully developed such model for turning operations and managed to establish the stability lobes analytically. These lobes show the limit width of cut against cutting speed. In this project, the developed iterative approach to establishing the analytical lobes will be extended to milling. The chatter model, including process damping, will then be applied to 5-axis flank milling.The developed chatter model will be integrated with the 3 ½ ½ machining strategy to generate the optimal number of surface subdivisions (patches), and feed directions while avoiding machining instability. In this strategy each patch is machined at fixed workpiece tilt angles. While it leads to higher rigidity and shorter machining time, it is more prone to gouging and interference as the tool moves across patches. In this project these problems will be addressed.The developed chatter model will also be integrated with tool positioning strategies in simultaneous 5-axis machining to optimize the tool path over the entire workpiece surface. The machine kinematics will be taken into account to help schedule the feed rate.All equipment necessary to conduct the experimental verifications is available in the Waterloo 5-axis machining lab.
Programme
Discovery Grants Program - Individual
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
5312-2011
Name nom
Ismail, Fathy
Department département
Mechanical Engineering and Mechatronics
Organization id
33
Institution établissement
University of Waterloo
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2014
Competition year année de concours
2011
Award amount
23000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1512
Committee name en
Mechanical Engineering
Committee name fr
Génie mécanique
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2100
Research subject group en
Mechanical engineering
Research subject group fr
Génie mécanique
Research subject en
Mechanical engineering
Research subject fr
Génie mécanique
Partie
4
Nb partie
5
Application title
Tool path planning and chatter avoidance in curved surfaces machining
Keyword
NSERC
Application summary
The objective of this proposal is to conduct fundamental investigations and to develop strategies for tool path planning in machining of curved surfaces. Such surfaces are encountered in numerous industrial parts like turbine blades, impellers, and tools and dies. Milling operations of these surfaces, especially in the semi-finishing and finishing stages, consume considerable time. A significant value has already been added by the time the part is ready for these operations. Research conducted by the applicant has shown that there is a need for developing tool path strategies to avoid chatter at those later stages while maximizing the metal removal rate and generating the surface at required roughness. A critical factor in developing a chatter model is to include process damping. This damping arises in machining materials, like Titanium, at low speeds. The applicant has successfully developed such model for turning operations and managed to establish the stability lobes analytically. These lobes show the limit width of cut against cutting speed. In this project, the developed iterative approach to establishing the analytical lobes will be extended to milling. The chatter model, including process damping, will then be applied to 5-axis flank milling.The developed chatter model will be integrated with the 3 ½ ½ machining strategy to generate the optimal number of surface subdivisions (patches), and feed directions while avoiding machining instability. In this strategy each patch is machined at fixed workpiece tilt angles. While it leads to higher rigidity and shorter machining time, it is more prone to gouging and interference as the tool moves across patches. In this project these problems will be addressed.The developed chatter model will also be integrated with tool positioning strategies in simultaneous 5-axis machining to optimize the tool path over the entire workpiece surface. The machine kinematics will be taken into account to help schedule the feed rate.All equipment necessary to conduct the experimental verifications is available in the Waterloo 5-axis machining lab.