Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Engage Grants Program

Carleton University

$25,000.00

Absolute kinematic calibration of six-axis serial industrial robots using relative measurements

EF 2013-14

Résumé
The inherent lack of positioning accuracy in standard, un-calibrated industrial robots is a limiting factor for their use in the automation of manufacturing processes, such as those at Enclosures Direct Inc. (EDI). Robots utilized for manufacturing are generally designed to have excellent repeatability (ability to continually reach the same position and orientation, or pose, defined by a set of joint angles stored in the controller) but are lacking in accuracy (moving to a pose for which the joint angles must be computed by the controller). To overcome the accuracy shortcomings the robots are typically used in a ""record and play"" mode where poses are manually taught by a technician and repeated for long production runs. When dealing with shorter production runs of customized products, as is the case at EDI where over 3000 different products are offered, it is not viable to manually teach all of the required poses which are instead calculated based on part dimensions or a CAD model. This approach requires the robots to be calibrated in order to meet accuracy requirements. Existing kinematic calibration methods require accurate and precise knowledge of the absolute pose of the robot end effector with respect to the robot base. Achieving this requires an elaborate and expensive measurement system and often requires moving the robot offsite to a calibrated measurement cell. This research project will use recent advances in joint mastering to identify the errors in the six joint angles using relative measurements of tool point position using a novel combination of position sensitive devices and a linear encoder. Once the joint zero values have been identified, the encoder measurements will be used to identify the remaining parameter errors. Observations that the joint angle error is generally larger than the error in the remaining parameters has led to the development of a measurement system that will allow for the separation of the joint angle calibration from the remaining parameters while employing the same experimental data set. The goal of the proposed project is to develop a complete and general system for the kinematic calibration of serial industrial robots.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Ontario, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
451559-2013
Name nom
Hayes, John
Department département
Mechanical & Aerospace Engineering
Organization id
23
Institution établissement
Carleton University
Province en
Ontario
Province fr
Ontario
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2013
Competition year année de concours
2013
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1553
Committee name en
Ontario Internal Decision Committee
Committee name fr
Comité de décision interne pour l'Ontario
Area of application code
500
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Manufacturing processes and products
Area of application fr
Procédés et produits industriels
Research subject code
2600
Research subject group en
Robotics
Research subject group fr
Robotique
Research subject en
Robotics
Research subject fr
Robotique
Partie
1
Nb partie
1
Application title
Absolute kinematic calibration of six-axis serial industrial robots using relative measurements
Keyword
NSERC
Application summary
The inherent lack of positioning accuracy in standard, un-calibrated industrial robots is a limiting factor for their use in the automation of manufacturing processes, such as those at Enclosures Direct Inc. (EDI). Robots utilized for manufacturing are generally designed to have excellent repeatability (ability to continually reach the same position and orientation, or pose, defined by a set of joint angles stored in the controller) but are lacking in accuracy (moving to a pose for which the joint angles must be computed by the controller). To overcome the accuracy shortcomings the robots are typically used in a ""record and play"" mode where poses are manually taught by a technician and repeated for long production runs. When dealing with shorter production runs of customized products, as is the case at EDI where over 3000 different products are offered, it is not viable to manually teach all of the required poses which are instead calculated based on part dimensions or a CAD model. This approach requires the robots to be calibrated in order to meet accuracy requirements. Existing kinematic calibration methods require accurate and precise knowledge of the absolute pose of the robot end effector with respect to the robot base. Achieving this requires an elaborate and expensive measurement system and often requires moving the robot offsite to a calibrated measurement cell. This research project will use recent advances in joint mastering to identify the errors in the six joint angles using relative measurements of tool point position using a novel combination of position sensitive devices and a linear encoder. Once the joint zero values have been identified, the encoder measurements will be used to identify the remaining parameter errors. Observations that the joint angle error is generally larger than the error in the remaining parameters has led to the development of a measurement system that will allow for the separation of the joint angle calibration from the remaining parameters while employing the same experimental data set. The goal of the proposed project is to develop a complete and general system for the kinematic calibration of serial industrial robots.