Canada Spends Logo

Explorez notre analyse du budget 2026

Grant: Engage Grants Program

University of Alberta

$25,000.00

ANALYSIS MODEL OF PILE-TO-PILE MECHANICAL CONNECTOR FOR SCREW PILES

EF 2015-16

Résumé
Screw piles consist of hollow steel pipe with one or more helical bearing plates welded to the pipe. They are installed by applying a downward force and a turning moment to the head of the pile, ""twisting"" the pile into the soil. Extensions to the original length of the pile are often needed to reach soil layers with sufficient load-bearing capacity. A common solution to pile extensions are welded connections. However, welding often entails an excessive amount of down-time during construction due to the required supervision of the welds by a specialist, making the process expensive. A new type of mechanical connector for use in pile extensions has been recently developed by Almita Piling Inc. The new connector represents a cost-effective alternative to welding, facilitating a rapid and efficient pile installation process. Almita Piling Inc. is interested in validating the design of the connector through a 3D finite-element analysis model. A robust, rigorous 3D model will be developed at the University of Alberta using state-of-the-art finite-element software. The model will be validated using experimental results from ""in-air"" tests conducted by Almita Piling Inc. The analysis model will be used to better understand the structural performance of the pile-to-pile connection, the load path through the coupler, the response of the mechanical connector under combined stresses, and to identify regions with high stress concentrations that potentially would lead to failure of the connector. Once validated, the model will be used to conduct a parametric analysis that includes studying the influence of different geometric details and material properties on the performance of the connector. Almita Piling Inc. will benefit from the analytical evidence generated in this study by showing that the connector performs as designed, and that it can be used safely for a wide range of pile sizes. Using the mechanical coupler instead of welded connections will be more cost-effective for Almita Piling Inc, allowing the company to offer its services more competitively, to reach new market areas, and to increase its business volume.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
Alberta, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data

Tel que publié

Application id
486359-2015
Name nom
CruzNoguez, Carlos
Department département
Civil and Environmental Engineering
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2015
Competition year année de concours
2015
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1555
Committee name en
Prairie Internal Decision Committee
Committee name fr
Comité de décision interne pour les Prairies
Area of application code
601
Area of application group en
Construction, urban and rural planning
Area of application group fr
Construction, urbanisme et aménagement rural
Area of application en
Structural engineering
Area of application fr
Génie des charpentes
Research subject code
1000
Research subject group en
Civil engineering
Research subject group fr
Génie civil
Research subject en
Civil engineering
Research subject fr
Génie civil
Partie
1
Nb partie
1
Application title
ANALYSIS MODEL OF PILE-TO-PILE MECHANICAL CONNECTOR FOR SCREW PILES
Keyword
NSERC
Application summary
Screw piles consist of hollow steel pipe with one or more helical bearing plates welded to the pipe. They are installed by applying a downward force and a turning moment to the head of the pile, ""twisting"" the pile into the soil. Extensions to the original length of the pile are often needed to reach soil layers with sufficient load-bearing capacity. A common solution to pile extensions are welded connections. However, welding often entails an excessive amount of down-time during construction due to the required supervision of the welds by a specialist, making the process expensive. A new type of mechanical connector for use in pile extensions has been recently developed by Almita Piling Inc. The new connector represents a cost-effective alternative to welding, facilitating a rapid and efficient pile installation process. Almita Piling Inc. is interested in validating the design of the connector through a 3D finite-element analysis model. A robust, rigorous 3D model will be developed at the University of Alberta using state-of-the-art finite-element software. The model will be validated using experimental results from ""in-air"" tests conducted by Almita Piling Inc. The analysis model will be used to better understand the structural performance of the pile-to-pile connection, the load path through the coupler, the response of the mechanical connector under combined stresses, and to identify regions with high stress concentrations that potentially would lead to failure of the connector. Once validated, the model will be used to conduct a parametric analysis that includes studying the influence of different geometric details and material properties on the performance of the connector. Almita Piling Inc. will benefit from the analytical evidence generated in this study by showing that the connector performs as designed, and that it can be used safely for a wide range of pile sizes. Using the mechanical coupler instead of welded connections will be more cost-effective for Almita Piling Inc, allowing the company to offer its services more competitively, to reach new market areas, and to increase its business volume.