Grant: Engage Grants Program
University of British Columbia
$25,000.00
Seismic design of deep basement walls
EF 2012-13
Résumé
The current state of practice for seismic design of basement walls in British Columbia is using the
Mononobe-Okabe (M-O) method, which is based on the Peak Ground Acceleration (PGA). Recently, the
National Building Code of Canada (NBCC) changed the seismic hazard level from 10% in 50 years in
NBCC1995 to 2% in 50 years in NBCC2010, which leads to doubling the PGA in Vancouver from 0.24g to
0.46g. The current design PGA leads to very large seismic forces that make the resulting structures very
expensive. Using the M-O method with the higher PGA, which results in a demand increase of about two over
the previous code revision, has raised some concerns from the design engineers on the applicability of the M-O
method with PGA for basement walls, especially when considering the generally good performance of
basement walls (which were often designed for much lower earth pressures) in the past earthquakes. It is
believed that the designed walls based on the M-O method with the PGA of NBCC2010 are too conservative
and the design loads could be reduced by using an appropriate fraction of PGA, to have a satisfactory
performance. To evaluate the current design procedures a series of nonlinear dynamic analyses will be
conducted to model the seismic behavior of the basement walls designed for various fractions of the
NBCC2010 PGA for Vancouver. The seismic performance of the basement walls will be analyzed and
evaluated under a number of seismic events spectrally matched to the Uniform Hazard Spectra enforced by the
NBCC2010 for Vancouver. A primary objective of this study would be to develop a criterion of satisfactory
performance of basement walls probably in terms of drift ratios. Different designed basement walls and backfill
soils will be considered under different ground motions. The nonlinear numerical model will take into account
the flexibility and potential yielding of the walls, as an effective procedure to study the lateral earth pressures
against basement walls. The effects of adding vertical component of ground motion will also be explored. The
final deliverable will be a complete report of all the research and the recommendations for seismic design.
Programme
Engage Grants Program
Bénéficiaire
Emplacement
British Columbia, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
445713-2012
Name nom
Taiebat, Mahdi
Department département
Civil Engineering
Organization id
2
Institution établissement
University of British Columbia
Province en
British Columbia
Province fr
Colombie-Britannique
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2012
Competition year année de concours
2012
Award amount
25000
Program id
EGP
Program name en
Engage Grants Program
Program name fr
Programme de subventions d'engagement partenariat
Group en
Research partnerships programs
Group fr
Programmes de partenariat
Committee code
1554
Committee name en
Pacific Internal Decision Committee
Committee name fr
Comité de décision interne pour le Pacifique
Area of application code
1206
Area of application group en
Advancement of knowledge
Area of application group fr
Avancement des connaissances
Area of application en
Engineering
Area of application fr
Génie
Research subject code
1000
Research subject group en
Civil engineering
Research subject group fr
Génie civil
Research subject en
Civil engineering
Research subject fr
Génie civil
Partie
1
Nb partie
1
Application title
Seismic design of deep basement walls
Keyword
NSERC
Application summary
The current state of practice for seismic design of basement walls in British Columbia is using the
Mononobe-Okabe (M-O) method, which is based on the Peak Ground Acceleration (PGA). Recently, the
National Building Code of Canada (NBCC) changed the seismic hazard level from 10% in 50 years in
NBCC1995 to 2% in 50 years in NBCC2010, which leads to doubling the PGA in Vancouver from 0.24g to
0.46g. The current design PGA leads to very large seismic forces that make the resulting structures very
expensive. Using the M-O method with the higher PGA, which results in a demand increase of about two over
the previous code revision, has raised some concerns from the design engineers on the applicability of the M-O
method with PGA for basement walls, especially when considering the generally good performance of
basement walls (which were often designed for much lower earth pressures) in the past earthquakes. It is
believed that the designed walls based on the M-O method with the PGA of NBCC2010 are too conservative
and the design loads could be reduced by using an appropriate fraction of PGA, to have a satisfactory
performance. To evaluate the current design procedures a series of nonlinear dynamic analyses will be
conducted to model the seismic behavior of the basement walls designed for various fractions of the
NBCC2010 PGA for Vancouver. The seismic performance of the basement walls will be analyzed and
evaluated under a number of seismic events spectrally matched to the Uniform Hazard Spectra enforced by the
NBCC2010 for Vancouver. A primary objective of this study would be to develop a criterion of satisfactory
performance of basement walls probably in terms of drift ratios. Different designed basement walls and backfill
soils will be considered under different ground motions. The nonlinear numerical model will take into account
the flexibility and potential yielding of the walls, as an effective procedure to study the lateral earth pressures
against basement walls. The effects of adding vertical component of ground motion will also be explored. The
final deliverable will be a complete report of all the research and the recommendations for seismic design.