Grant: Discovery Grants Program - Individual
University of Alberta
$33,000.00
Tubular Solid Oxide Fuel Cells
EF 2017-18
Résumé
Fuel cells are silent, modular andan efficient source of electricity (50-60%). They could be used for remote power, home heating, power plants and backup power for hospitals and manufacturingplants. When used reversibly, they can provide load leveling for renewable energy. When excess power is available, they can be used in electrolysis mode to provideenergy storage via fuel. Combining dryreforming of methane with a fuel cell can eliminate CO 2 while producing bothelectricity and CO, a valuable industrial raw material. High temperature solid oxide fuel cells (SOFCs) offer two main advantages over the low temperature versions: expensive catalysts can be avoided and a variety of fuels can be accommodated. The tubular design has some significant advantages over the planar configuration including low temperature sealing, superior mechanical properties, rapid start-up and higher volumetric power density if small diameter tubes are used. The main drawbacks are lower power outputmainly due to the long current path for the inner electrode and, as for the planar design, redox cycling (occurs when air enters the anode chamber) causes structural damage. In an effort to overcome these drawbacks, by using a combination of calcined powders, pore formers and slip casting, we have fabricated a robust tubular fuel cell with exceptional redox cycling resistance. It has infiltrated nanostructured electrodes which lead to greatly improved power output. Thenature of anode microstructure (phase distribution, porosity, pore size distribution) will berelated tocell performance as we have carried out recently for the cathode. Such a study might help understand the microstructural changes occurring in reversible cells (alternate between fuel cell and electrolysis modes). Optimum microstructures could then be identified. The main problems restricting commercialization are inefficient electrode infiltration, unacceptable current collection and degradation (gradual loss of power with time). Each will be studied. Solution composition, slurries and rapid heating could lead to better and faster infiltration. Current collectors will be evaluated as to conductivity, mechanical properties, form (solution, paste, wire, mesh, etc.) and stability. The main causes of degradation which are coarsening of nanostructures, delamination of current collectors and diffusion will be correlated with operating temperature, current density and gas flow rates (fuel utilization). Applications including energy storage as fuel andCO 2 elimination will be concurrently considered. Building on our recent success overcoming redox cycling and improving power output, this research should improve understanding of SOFC behaviour and move tubular cells closer to commercialization. Whether for traditional power generation or unique uses,Canada will benefit as both a major supplier of fossil fuels and a large CO2 emitter.
Programme
Discovery Grants Program - Individual
Bénéficiaire
Emplacement
Alberta, Canada
Type de bénéficiaire
Academia
Type
Grant
Source
NSERC's Awards Data
Tel que publié
Application id
RGPIN-2016-05492
Name nom
Etsell, Thomas
Department département
Chemical and Materials Engineering - Chemical and Materials Engineering
Organization id
9
Institution établissement
University of Alberta
Province en
Alberta
Province fr
Alberta
Country en
CANADA
Country fr
CANADA
Fiscal year exercice financier
2017
Competition year année de concours
2016
Award amount
33000
Program id
RGPIN
Program name en
Discovery Grants Program - Individual
Program name fr
Programme de subventions à la découverte - individuelles
Group en
Discovery grants programs
Group fr
Programmes de subventions à la découverte
Committee code
1511
Committee name en
Materials and Chemical Engineering
Committee name fr
Génie chimique et des matériaux
Area of application code
511
Area of application group en
Manufacturing processes and products
Area of application group fr
Procédés et produits industriels
Area of application en
Ceramic, glass and industrial mineral products
Area of application fr
Céramique, verre et autres produits minéraux industriels
Research subject code
2005
Research subject group en
Materials science and technology
Research subject group fr
Science et technologie des matériaux
Research subject en
Ceramics
Research subject fr
Céramiques
Partie
2
Nb partie
5
Application title
Tubular Solid Oxide Fuel Cells
Keyword
NSERC
Application summary
Fuel cells are silent, modular andan efficient source of electricity (50-60%). They could be used for remote power, home heating, power plants and backup power for hospitals and manufacturingplants. When used reversibly, they can provide load leveling for renewable energy. When excess power is available, they can be used in electrolysis mode to provideenergy storage via fuel. Combining dryreforming of methane with a fuel cell can eliminate CO 2 while producing bothelectricity and CO, a valuable industrial raw material. High temperature solid oxide fuel cells (SOFCs) offer two main advantages over the low temperature versions: expensive catalysts can be avoided and a variety of fuels can be accommodated. The tubular design has some significant advantages over the planar configuration including low temperature sealing, superior mechanical properties, rapid start-up and higher volumetric power density if small diameter tubes are used. The main drawbacks are lower power outputmainly due to the long current path for the inner electrode and, as for the planar design, redox cycling (occurs when air enters the anode chamber) causes structural damage. In an effort to overcome these drawbacks, by using a combination of calcined powders, pore formers and slip casting, we have fabricated a robust tubular fuel cell with exceptional redox cycling resistance. It has infiltrated nanostructured electrodes which lead to greatly improved power output. Thenature of anode microstructure (phase distribution, porosity, pore size distribution) will berelated tocell performance as we have carried out recently for the cathode. Such a study might help understand the microstructural changes occurring in reversible cells (alternate between fuel cell and electrolysis modes). Optimum microstructures could then be identified. The main problems restricting commercialization are inefficient electrode infiltration, unacceptable current collection and degradation (gradual loss of power with time). Each will be studied. Solution composition, slurries and rapid heating could lead to better and faster infiltration. Current collectors will be evaluated as to conductivity, mechanical properties, form (solution, paste, wire, mesh, etc.) and stability. The main causes of degradation which are coarsening of nanostructures, delamination of current collectors and diffusion will be correlated with operating temperature, current density and gas flow rates (fuel utilization). Applications including energy storage as fuel andCO 2 elimination will be concurrently considered. Building on our recent success overcoming redox cycling and improving power output, this research should improve understanding of SOFC behaviour and move tubular cells closer to commercialization. Whether for traditional power generation or unique uses,Canada will benefit as both a major supplier of fossil fuels and a large CO2 emitter.